Hi Fi Studio Sdn Bhd
61, Jalan Dedap 6,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
+607-352 1923
+607-352 1923

REGA RP3 ELYS II Turntable

REGA RP3 ELYS II Turntable

REGA RP3 ELYS II Turntable

RM 4,419.00 In Stock

The Rega RP3 is designed and engineered to achieve outstanding performance far beyond the expectations of a product at its price point. Excellent build quality, reliability and ease of use combine to make a product which will offer a lifetime of musical enjoyment. By eschewing over-engineering and omitting unnecessary appurtenances, Rega was able to focus design and manufacturing costs on high quality parts necessary for accurate LP reproduction. The RP3 is fitted with a brand new hand assembled RB303 tonearm, precision main bearing and a low vibration low noise 24v motor assembly which is individually hand tuned to its circuit to further reduce vibration.

Double Brace Technology

“Mass absorbs energy – lost energy equals lost music”! Rega has pioneered the use of lightweight rigid plinths. Clever use of lightweight particulate core with a highly rigid phenolic resin skin became the foundations of the high level of performance achieved by the now iconic Planar turntable range. The RP3 takes this design philosophy to the next level. A super lightweight plinth combined with a phenolic resin double brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) forms a structurally sound “stressed beam” assembly. This rigid plinth design prevents energy absorption and unwanted resonances which will add unnatural distortions to the music. Equally, heavier mass can transfer more unwanted energy such as motor or bearing noise directly into the rotating record. The use of braces instead of the complete skin allows double thickness phenolic resin in these key areas while providing further weight reduction to the plinth which directly addresses the issue of mass absorption and unwanted energy transmission.

RB303 Tonearm – Making the best better

Designed using the latest 3D CAD & CAM technology the new RB303 is the culmination of more than 30 years of tonearm design experience. Due to advances in technology we have been able to fine tune the iconic RB300 tonearm design. Featuring a brand new tube with increased rigidity to the bearing housing, arm carrier and headshell coupled with intelligent redistribution of mass ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction free movement from the high precision bearing assemblies guarantee to gather more information from your vinyl than ever before.


  • RB303 tonearm
  • Double brace technology
  •  Light weight plinth design
  • 24v low noise low vibration hand tuned motor assembly
  • 3 high quality plinth finishes


Supports  MM (Moving Magnet) and MC (Moving Coil) cartridges
Input sensitivity 4-6mV (MM), 0.4-0. mV (MC)
Output level 500-550mV
Maximum input  > 80mV (MM), > 8mV (MC)
Maximum output  > 8V
Output impedance < 680 Ω
Gain (1kHz)  38-42 dB (MM), 58-62 dB (MC)
Distortion (5mV input): < 0.1% (MM), < 0.3% (MC)
S/N (A weighting) > 65 dB (MM), > 55 dB (MC)
RIAA accuracy ±1dB
Channel balance  < 0.5 dB
Channel separation > 60 dB (MM), > 50 dB (MC)
Dimensions  (W x D x H) 140mm x 160mm x 48mm

Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
*only support gif, jpeg, jpg, png, pdf

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version